Berkeley researchers send 3D printer into space - Berkeley Engineering (2024)

SpaceCAL tests the limits of additive manufacturing on Virgin Galactic 07 mission

July 2, 2024 by Marni Ellery

Imagine a crew of astronauts headed to Mars. About 140 million miles away from Earth, they discover their spacecraft has a cracked O-ring. But instead of relying on a dwindling cache of spare parts, what if they could simply fabricate any part they needed on demand?

A team of Berkeley researchers, led by Ph.D. student Taylor Waddell, may have taken a giant leap toward making this option a reality. On June 8, they sent their 3D printing technology to space for the first time as part of the Virgin Galactic 07 mission. Their next-generation microgravity printer — dubbed SpaceCAL — spent 140 seconds in suborbital space while aboard the VSS Unity space plane. In that short time span, it autonomously printed and post-processed a total of four test parts, including space shuttles and benchy figurines from a liquid plastic called PEGDA.

“SpaceCAL performed well under microgravity conditions in past tests aboard parabolic flights, but it still had something to prove,” said Waddell. “This latest mission, funded through NASA’s Flight Opportunities program and with support from Berkeley Engineering and the Berkeley Space Center, allowed us to validate the readiness of this 3D printing technology for space travel.”

He added, “We hope that someday it may be used to manufacture everything from parts and tools for spacecraft to new contact lenses and dental crowns for crew members.”

Berkeley researchers send 3D printer into space - Berkeley Engineering (1)

SpaceCAL 3D printer on VSS Unity, awaiting launch on June 8, 2024. (Image courtesy of Virgin Galactic)

3D printing, also known as additive manufacturing, has evolved considerably since it was first patented in the 1980s. Hayden Taylor, associate professor of mechanical engineering, led a team of UC Berkeley and Lawrence Livermore National Laboratory (LLNL) researchers that invented Computed Axial Lithography (CAL) technology in 2017. This new type of additive manufacturing, which uses light to shape solid objects out of a viscous liquid, expanded the range of printable geometries and significantly increased the speed at which 3D parts could be printed. And it functioned well in microgravity conditions, opening the door to applications related to space exploration.

CAL technology is also what brought Waddell to Berkeley to pursue his Ph.D. in mechanical engineering. As an undergraduate at the University of Wisconsin, Madison, and a Pathways Engineer at NASA, Waddell became captivated by 3D printing — from its seemingly magical ability to transform an idea into a physical form, to its affordability and accessibility.

Upon learning about CAL, he reached out to Taylor and soon found himself at Berkeley. There, he spent countless hours in Taylor’s lab, working with other student researchers on new ways to leverage this technology for the greater good.

Reaching new heights

CAL stands apart from other 3D printing technologies because of its incredible speed — creating parts in as little as 20 seconds — and efficiency. By enabling astronauts to print parts quickly in an emergency and on demand, CAL potentially eliminates the need to bring thousands of spare parts on long-duration space missions.

“You can reduce that upmass, make these missions go faster and reduce risk by bringing manufacturing technologies with you,” said Waddell.

In addition, CAL’s unique ability to print well in microgravity conditions allows engineers to explore the limits of 3D printing from space.

Berkeley researchers send 3D printer into space - Berkeley Engineering (2)

Space shuttle figurine printed by SpaceCAL, floating in microgravity, fully post-processed. (Image courtesy of Taylor Waddell)

“With CAL, we were able to demonstrate — first on those zero-G[ravity] missions and now on this spaceflight — that we can print parts in microgravity that are not possible on Earth,” said Waddell.

To date, CAL has shown that it can successfully print with more than 60 different materials on Earth, such as silicones, glass composites and biomaterials. According to Waddell, this versatility could come in handy for both the cabin and the crew.

“So, with the cabin, if your spacecraft is breaking down, you can print O-rings or mechanical mounts or even tools,” he said. “But CAL is also capable of repairing the crew. We can print dental replacements, skin grafts or lenses, or things personalized in emergency medicine for astronauts, which is very important in these missions, too.”

Someday, CAL may be used to print even more sophisticated parts, such as human organs. LLNL has received a grant from NASA to test this technology on the International Space Station.

“They’re going to basically do bioprinting on the Space Station,” said Waddell. “And the long, long-term goal is to print organs up in space with CAL, then bring them back down to Earth.”

Next, Waddell and his colleagues hope to begin work with NASA on developing and validating a single object that could support crew health and wellness, like a dental crown for an astronaut or a surgical wound closure tool.

Berkeley researchers send 3D printer into space - Berkeley Engineering (3)

SpaceCAL team members at NASA Ames, doing environmental testing (left to right): Dillon Balk, Sean Chu, Ameera Elgonemy and Brian Chung. (Image courtesy of Taylor Waddell)

“These experiments are really focused on pushing technology for the betterment of everyone,” said Waddell. “Even though it’s for space, there are always tons of ways it can benefit people back here on Earth.”

It’s also the type of technology that the Berkeley Space Center envisions being developed at its new 36-acre campus currently under development. The Berkeley Space Center will be a home for innovation and entrepreneurship, bringing together technologies developed by NASA and UC Berkeley, and commercialized through private industry. “Imagine a place where private companies can take inventions like those created by Taylor Waddell and make it possible for these important discoveries to break out of the lab and into the public realm,” said Darek DeFreece, a regent emeritus of the University of California and the head of UC Berkeley’s efforts to develop the Berkeley Space Center. “We were cheering as we watched the historic Virgin Galactic 07 flight.”

A collaborative effort

In many ways, the June 8 space mission was a culmination of years of research by all the students in Hayden Taylor’s nanoscale manufacturing lab. Together, they are pushing the boundaries of a relatively new technology to see what is possible.

“This project is built on a team of many, many people,” said Waddell, including student researchers Dillon Balk, Skyler Chan, Sean Chu, Brian Chung, Ameera Elgonemy, Jacob Gottesman, Anthony Moody, Jake Nickel, Dylan Potter, Austin Portinause, Anusri Sreenath and Audrey Young.

He also credits his advisor for providing critical support and the opportunity to take an active role in the evolution of CAL technology.

Berkeley researchers send 3D printer into space - Berkeley Engineering (4)

SpaceCAL team members at Virgin Galactic launch site (left to right): Sean Chu, Jake Nickel, Austin Portinause, Taylor Waddell and Brian Chung. (Image courtesy of Virgin Galactic)

“Hayden is one of the best PIs out there. He gives me the responsibility to choose where I want to push this research,” said Waddell. “With his last three SpaceCAL missions, he lets me lead them, from deciding who to hire and what we want to research to planning the whole trip. He really lets me be where I’m most passionate and use him as the resource to make that happen.”

This project was made possible through a $1.4 million grant and engineering support provided by NASA. In addition, Virgin Galactic played a pivotal role in taking this project to the next level.

“The team at Virgin Galactic helped us each step of the way, especially during the week preparing for the rocket launch,” said Waddell. “There were a lot of excellent engineers and passionate people who wanted to make sure that we were successful.”

Berkeley researchers send 3D printer into space - Berkeley Engineering (5)

SpaceCAL mission patch. This latest mission marks the first time the 3D printer has traveled to space. (Image courtesy of Kirk Mendoza)

For more information

Moffett Field initiative supports next generation of space 3D printing

Virgin Galactic completes 12th successful spaceflight

Berkeley students flip, float and experiment on zero gravity flight

Topics: Aerospace, , Manufacturing, Mechanical engineering, Research, Students

Berkeley researchers send 3D printer into space - Berkeley Engineering (2024)

References

Top Articles
Latest Posts
Article information

Author: Dan Stracke

Last Updated:

Views: 6489

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.