RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.
Ring Doorbell is one of the best smart doorbells on the market with its easy installation, live video, audio streaming quality, and compatibility with home automation systems.
However, if you are a new user of Ring Doorbell, it can seem almost impossible to figure out what your doorbell is telling you, as was the case with me.
Distinct patterns on your Ring Doorbell can mean different things. Initially, I also was very much confused by my Ring Doorbell blinking blue.
But over time, encountering issues like live view not working, I had to dabble in Ring doorbell maintenance many times, including when I wrote a guide to install them to a door.
So you can trust me when I say that your Ring doorbell flashing blue has a very simple explanation; that also comes with an even easier fix.
If your Ring doorbell is flashing blue, troubleshoot it by triggering some alarms and checking your internet connection.
If your Ring Doorbell still flashes blue, contact Ring support. I’ve also gone into detail about triggering an alarm and checking your network.
Why Is Your Ring Doorbell Flashing Blue?
The blue LED on your Ring Doorbell can tell you everything you need to know about the state of the device.
It can flash in various blue and white patterns, and every different pattern can give a separate message.
It is essential to understand the various messages your Ring Doorbell can convey through its light to ensure your device is working correctly.
| Blue Light Pattern | What It Conveys |
|---|---|
| Blue light goes on and off at one-second intervals | The Ring Doorbell is starting up or rebooting |
| Blue light flashes and moves upwards | The Ring Doorbell is connecting to WiFi during the setup process |
| Blue light flashes four times and is then followed by a white circle | The Ring Doorbell setup is complete and is ready for use |
| Top half of the blue light is blinking | The WiFi password entered into the Ring app during setup was wrong. In Ring Doorbell Pro, it can mean that the built-in battery is completing its first charge. |
| Short, quick blue flashes followed by a spinning white circle | The Ring Doorbell has been successfully reverted to its factory default settings |
| Spinning blue light | The Ring Doorbell button was pressed |
| Solid blue light | Two-way audio is currently in use |
Ring Doorbell Blinking Blue During Setup
Usually, you’ll see the Ring Doorbell blue light spinning during setup. The Ring doorbell blinks blue to indicate that your doorbell is trying to connect to your home WiFi network.
Upon entering the wrong password on the Ring app during setup, the top half of the blue light will flash, telling you to re-enter the password to complete the setup.
Once the setup is complete, the light will flash blue four times and then display a white circle to signify that it is ready for use.
Ensure to have a steady and strong WiFi connection to your doorbell. Otherwise, you can face a delay in its functioning.
Ring Blue Light Flashing At Random Times
If you see your Ring Doorbell flashing blue at one-second intervals at any time after the setup is complete, it means that your doorbell is rebooting.
This happens whenever your doorbell loses power or if it receives an automatic firmware update.
When the doorbell is flashing steadily, all you need to do is wait and allow your Ring Doorbell to reboot. This action may take a few minutes.
It is common for Ring Doorbells to reboot occasionally. However, if this is a regular occurrence, it may be a problem.
To ensure this doesn’t happen, make sure to charge your Ring Doorbell battery regularly.
In the case of hardwired doorbells, make sure that the wires are intact and connected securely.
Ring Doorbell Flashing Blue While Charging
The blue light pattern you see on your Ring Doorbell when it is charging depends on your model.
For the first and second-generation Ring Doorbells, you charge the battery by inserting the charging cable directly into the port behind the doorbell.
Your Ring Doorbell blinking blue while plugged in indicates that the doorbell is currently charging.
The circle light fills up to indicate the increase in battery life. When the battery is fully charged, the light turns solid blue.
In other battery-operated Ring Doorbell models, there are removable batteries that can be charged externally.
Removing the doorbell batteries makes the light go off, and they come back on only when they are replaced.
Though the Ring Doorbell Pro is a hardwired device, it still needs to be charged several hours after the setup for the first time.
The charging begins automatically upon setup, with the top half of the LED blinking blue. The light goes off once it has finished charging.
Sometimes, the Ring app’s battery can say your doorbell is low on power even if it has just been charged.
In that case, give the doorbell a few test rings to display the app’s correct battery level.
This works because the battery measurement inside the app is updated each time you press and ring the doorbell button.
Ring Chime Flashing Blue Light
Like the Ring Doorbell, the blue light’s function in Ring Chime is to tell you the status of the device.
A solid blue light indicates that the Chime is functioning perfectly, no light means it is not receiving any power, and a blinking blue light means there is some other issue with the device.
When the blue light is flashing, it can mean one of four things:
- The device is setting up.
- The device is rebooting.
- The device is reconnecting to the WiFi network.
- An automatic update is being installed to the device.
Ring Camera Flashing Blue And White
When the Ring Doorbell starts flashing blue and white, it means that the Doorbell is undergoing a factory reset.
You can see this when you start a factory reset from your phone, but if you still see this exact sequence without you doing anything, the Doorbell might have gotten itself stuck in a reset loop.
Contacting Ring support would be the best course of action at that point.
Another blue and white sequence, but with 4 separate LEDs can be seen when you first power on the doorbell.
This indicates that the setup procedure you followed was successful, and might take up to an hour to fully power up.
Ring Doorbell Light Spinning
The spinning white light appears when the Doorbell is attempting to set up the WiFi connection if there aren’t any saved credentials in the Doorbell. Ring will be unable to join Network so long as this persists.
You won’t need to do anything about this status light since it times out after 10 minutes of not being able to connect to the WiFi.
Although the Doorbell not connecting to the WiFi might be a cause for concern, fixing it is pretty straightforward.
Troubleshooting Ring Doorbell Flashing Blue
The flashing blue light on your Ring Doorbell means that your device is charging.
After about 3 or 4 hours, it should turn off automatically once the battery is fully charged.
However, if it continues to flash for a long time, here are some troubleshooting solutions for you to try.
Try Triggering Some Alarm
There might be a bug in the software causing the doorbell to blink continuously.
Try triggering an alert either using the doorbell button or the Ring smartphone app to resolve this issue.
You can also try other solutions such as restarting the doorbell, resetting your ring doorbell or using various features on it.
Check Your Internet Connection
Even if your battery is fully charged, your Ring Doorbell may not be able to detect it if your doorbell cannot connect to the internet due to a weak connection.
To fix this issue, make sure your internet connection is up and working perfectly, and also make sure that your Ring Doorbell is connected to the network.
Contact Ring Support
If none of these solutions work for you, it might indicate an internal issue with the doorbell, such as the battery, wiring, or the LED light itself.
In this case, the best course of action for you is to call Ring customer support for assistance.
They will provide you with some diagnostic steps to determine the problem and find a solution without voiding your warranty.
Final Thoughts
The LED on your Ring Doorbell can tell you a lot of different things just from the way it blinks.
It’s important to know what each pattern signifies so that you can better understand your device’s status.
A continuous, blinking blue light is not a cause of worry and, in most cases, can be fixed in a few simple steps.
When I had a similar issue, charging the doorbell and a simple reboot helped solve the problem.
But, it is best to get some expert help from Ring customer care service or directly take your doorbell to the nearby service center if the problem persists.
You May Also Enjoy Reading
- 3 Red Lights On Ring Doorbell: How To Fix In Seconds
- How Long Does Ring Doorbell Battery Last?
- Best Ring Doorbells for Apartments And Renters
- Best Ring Doorbell Alternatives Without Subscription
- Can You Change Ring Doorbell Sound Outside?
Frequently Asked Questions
What does it mean when your Ring Doorbell is flashing blue?
The constant flashing blue light on your doorbell indicates that it is charging.
The circle fills up to show the increasing battery life. The light is solid blue when the battery is fully charged and will turn off when it is not charging.
Why does my Ring Doorbell keep blinking?
A blinking blue light indicates the doorbell is charging. Blinking white light means your doorbell has either lost connection to the internet or the battery does not have sufficient power.
How long does the battery last on the Ring Doorbell?
According to Ring, your fully charged battery on your doorbell can last anywhere in the range of six months to a year, depending on the activity it receives and the outdoor weather conditions.
Temperature and humidity play a significant role in determining battery health.
Do I have to charge my Ring Doorbell if it is hardwired?
Yes, your hardwired Ring Doorbell receives a trickle charge from the wiring, which is solely used to charge the battery.
The power from the battery, in turn, is used to power all of the doorbell’s operations.
How long does it take to charge the Ring Doorbell battery?
The Ring Doorbell is charged using a standard micro-USB cable from any USB source and can take around five to ten hours to charge fully.
